Deck cleaning
Decks brushed clean with very little water. No water blaster, so no softened timber ripped out and no furry, grooved boards.
What's included
- A look at the deck and a test patch first
- A mechanical brush pass with diluted Bona Deep Clean Solution
- A clean-water pass to rinse away the dirt that was lifted
- A third pass where the deck is heavily soiled
Why it's safe for decks
- A brush lifts the dirt without tearing out the softer wood
- Very little water, so less soaks into the timber
- The cleaner leaves no residue or powder and does not discolour
- Even results across the whole deck, with no wand stripes
Test patch first. We always clean a small area first to check how your floor responds before we do the rest.
Why we don't water blast decks
Water blasting
- Water soaks into deck timber and softens it over time.
- The blaster rips the softer wood out, leaving a furry finish and grooves in the boards.
- It's easy to get wrong, and the damage can't be undone. Damaged boards have to be replaced.
- It uses a lot more water.
LookClean brush clean
- A mechanical brush lifts the dirt instead of cutting into the wood.
- No furry finish, no grooves.
- Bona Deep Clean Solution: no residue, no powder, no discolouring.
- Very little water.
Three levels of clean, matched to the floor.
We recommend a level once we've seen the floor, or photos of it. Every job starts with a test patch.
- Most floors
Standard two-pass
One pass with diluted Bona Deep Clean Solution and the brush, then a second pass with clean water to rinse away the dirt that was lifted.
- Heavier soiling
Three-pass
A step up from the standard clean, for floors and decks with more built-up dirt. We recommend it after seeing how soiled the floor is.
- Old polish build-up
Polish removal
A separate system for taking old polish off the floor. Ask us whether your floor needs it.
How a job runs
- 01
Tell us about the floor
Floor type, rough size, suburb and a few photos. We'll recommend a service level and quote.
- 02
Test patch
Before we clean, we always test a small area first to check how the floor responds.
- 03
Brush clean
A mechanical brush pass with diluted Bona Deep Clean Solution lifts the dirt out of the surface.
- 04
Clean-water rinse
A second pass with clean water takes away the lifted dirt. Heavier soiling gets a third pass.
Keep it clean between visits. The Bona spray mop for sealed timber floors, shipped NZ-wide.
Other floors we clean
Floor looking tired? Let's get it clean.
Tell us the floor type, roughly how big it is and your suburb. Photos help. We'll come back to you with a quote.
Cleaning in Auckland only. Bona mops and cleaners shipped anywhere in New Zealand.